- 29 -
2.5.5.3 State Activity
Active (select): The port automatically sends LACP protocol packets.
N/A (no select): The port does not automatically sends LACP protocol packets, and responds only if it
receives LACP protocol packets from the opposite device.
1. A link that has either two active LACP ports or one active port can perform dynamic LACP trunking.
A link has two N/A LACP ports will not perform dynamic LACP trunking because both ports are
waiting for and LACP protocol packet from the opposite device.
2. If you are active LACP’s actor, when you are select trunking port, the active status will be created
automatically.