4.2.1. Port Configuration
This page can change every port status.
Press Space key to change configures of per item.
1.InRate (100K/unit):
User can set input rate control, per unit is 100K. The valid range is 0~1000. 0: disable rate control.
1~1000: valid rate value.
2.OutRate (100K/unit):
User can set output rate control, per unit is 100K. The valid range is 0~1000. 0: disable rate control.
1~1000: valid rate value.
3.Enabled:
User can disable or enable this port control. “Yes” that mean the port is enable.
“No” that mean the port is disable.
4.Auto:
User can set auto negotiation mode is “Auto”, “Nway_Force”, “Force” of per port.
5.Spd/Dpx:
User can set “100Mbps” or “10Mbps” speed on port 1~port 24,
Set “1000Mbps”, “100Mbps” or “10Mbps” speed on port25~port26 (depend on module card mode), and set
- 68 -
