Create 802.1Q VLAN
Create an 802.1Q VLAN and add tagged /untagged member ports to it.
1.Select <Edit>.
2.VLAN Name: Type a name for the new VLAN.
3.VLAN ID: Type a VID (between 1~4094). The default is 1. There are 256 VLAN groups to provided configure.
4.Protocol VLAN: Press Space key to choose protocols type.
5.Member: Press Space key to choose VLAN member. There are three types to selected:
a.UnTagged：This port is the member port of this VLAN group and outgoing frames are NO
b.Tagged：This port is the member port of this VLAN group and outgoing frames are
c.NO：The port is NOT member of this VLAN group.
6.Press Ctrl+A go back action menu line.
7.Select <Save> to save all configure value.
NOTE: If the trunk groups exist, you can see it (ex: TRK1, TRK2…) after port 26, and you can configure it is the member of the VLAN or not.
- 74 -
