Wireless-G VPN Broadband Router

2.Enter any name you want to use for the Customized Application.

3.Enter the External Port range of the service you are using. For example, if you have a web server, you would enter the range 80 to 80.

4.Check the protocol you will be using, TCP and/or UDP.

5.Enter the IP address of the PC or network device that you want the port server to go to. For example, if the web server’s Ethernet adapter IP address is 192.168.1.100, you would enter 100 in the field provided. Check “Appendix D: Finding the MAC Address and IP Address for Your Ethernet Adapter” for details on getting an IP address.

6.Check the Enable option for the port services you want to use. Consider the example below:

Customized

External Port

TCP

UDP

IP Address

Enable

Application

 

 

 

 

 

Web server

80 to 80

X

X

192.168.1.100

X

FTP server

21 to 21

X

 

192.168.1.101

X

SMTP (outgoing)25 to 25

X

X

192.168.1.102

X

POP3 (incoming)110 to 110

X

X

192.168.1.102

X

When you have completed the configuration, click the Save Settingsbutton.

7.I need to set up online game hosting or use other Internet applications.

If you want to play online games or use Internet applications, most will work without doing any port forwarding or DMZ hosting. There may be cases when you want to host an online game or Internet application. This would require you to set up the Router to deliver incoming packets or data to a specific computer. This also applies to the Internet applications you are using. The best way to get the information on what port services to use is to go to the website of the online game or application you want to use. Follow these steps to set up online game hosting or use a certain Internet application:

1.Access the Router’s web interface by going to http://192.168.1.1 or the IP address of the Router. Go to the Applications and Gaming => Port Forwarding tab.

2.Enter any name you want to use for the Customized Application.

3.Enter the External Port range of the service you are using. For example, if you want to host Unreal Tournament (UT), you would enter the range 7777 to 27900.

4.Check the protocol you will be using, TCP and/or UDP.

5.Enter the IP address of the PC or network device that you want the port server to go to. For example, if the web server’s Ethernet adapter IP address is 192.168.1.100, you would enter 100 in the field provided. Check “Appendix D: Finding the MAC Address and IP Address for Your Ethernet Adapter” for details on getting an IP address.

6.Check the Enable option for the port services you want to use. Consider the example below:

Appendix A: Troubleshooting

52

Common Problems and Solutions

Page 56
Image 56
Cisco Systems WRV54G manual Tcp Udp