Cisco Systems WRV54G manual Figure C-7 IP Filter List

Wireless-G VPN Boradband Router

8.The IP Filter List screen should appear, as shown in Figure C-7. Enter an appropriate name, such as router->win for the filter list, and de-select the Use Add Wizard check box. Click the Add button.

9.The Filters Properties screen will appear, as shown in Figure C-8. Select the Addressing tab. In the Source address field, select A specific IP Subnet, and enter the IP Address: 192.168.1.0 and Subnet mask: 255.255.255.0. (Enter your new values if you have changed the default settings.) In the Destination address field, select My IP Address.

10.If you want to enter a description for your filter, click the Description tab and enter the description there.

11.Click the OK button and the New Rule Properties screen should appear with the IP Filer List tab selected, as shown in Figure C-9. There should now be a listing for “router -> win” and “win -> router”. Click the OK (for WinXP) or Close (for Win2000) button on the IP Filter List window.

Appendix C: Configuring IPSec between a Windows 2000 PC and the Router

Figure C-7: IP Filter List

Figure C-8: Filters Properties

Figure C-9: New Rule Properties

73

How to Establish a Secure IPSec Tunnel