Compaq M300 manual Running a Diagnostic Test, 14-7

14-7

Displaying System Information

1.Access Compaq Diagnostics for Windows.

■In Windows 95 or Windows 98 select Start⊕ Settings⊕Control Panel⊕Compaq Diagnostics.

■In Windows NT 4.0 select Start⊕Programs⊕ Administrative Tools⊕Compaq Diagnostics.

2.Select Categories, then select a category from the drop-down list.

■To save the information, select File⊕Save As.

■To print the information, select File⊕Print.

3.To close Compaq Diagnostics for Windows, select File⊕Exit.

Running a Diagnostic Test

1.Access Compaq Diagnostics for Windows.

■In Windows 95 or Windows 98 select Start⊕ Settings⊕Control Panel⊕Compaq Diagnostics.

■In Windows NT 4.0, select Start⊕Programs⊕ Administrative Tools⊕Compaq Diagnostics.

2.Select the Test tab.

3.In the scroll box, select the category or device you want to test.

4.Select a test type.

■Quick Test—Runs a quick, general test on each device in a selected category.

■Complete Test—Performs maximum testing on each device in a selected category.

■Custom Test—Performs maximum testing on a selected device.

❏To run all tests listed beneath your selection, select the Check All button.

❏To run only the tests you select, select the Uncheck All button, then select the check box beside each test you want to run.