Compaq M300 Using Compaq Diagnostics for Windows, 14-6Configuration and Diagnostic Utilities

14-6Configuration and Diagnostic Utilities

Selecting from the Advanced Menu Continued

Device Options	■ Enable/disable the embedded
	numeric keypad at startup.
	■ Enable multiple standard pointing
	devices at startup, or disable this
	feature so the computer supports
	only a single (usually
	non-standard) pointing device at
	startup.
	■ Enable/disable USB legacy support
	for one USB mouse and one USB
	keyboard. (When USB legacy
	support is enabled, the keyboard
	and mouse work without a loaded
	USB driver.)
	■ Set an optional external monitor or
	overhead projector connected to a
	video card in a docking base as
	the primary device. (When the
	computer display is set as
	secondary, the computer must be
	shut down before undocking.)
	■ Change the parallel port mode
	from EPP (default) to standard,
	bidirectional, EPP, or ECP.

Using Compaq Diagnostics for Windows

■When you access Compaq Diagnostics for Windows, a scan of all system components appears on the screen before the Compaq

nDiagnostics window opens.

You can display more or less information from anywhere within

Compaq Diagnostics for Windows by selecting Level on the menu bar.

■Compaq Diagnostics for Windows are designed to test Compaq components. If non-Compaq components are tested, the results may be inconclusive.