Compaq M300 manual Enabling the Keypad at Startup, 8Using the Keyboard

3-8Using the Keyboard

Enabling the Keypad at Startup

To set the computer to start up with the embedded numeric keypad enabled:

1.Turn on or restart the computer, then press F10 when the blinking cursor appears in the upper-right corner of the screen.

❏To change the language, press F2.

❏For navigation instructions, press F1.

2.Select Advanced⊕Device Options, then press Enter.

3.Toggle the field beside Num Lock State at Boot to On, then press F10.

4.To save your preferences, close Computer Setup, and restart the computer, select File⊕Save Changes and Exit, then press Enter.

5.When you are prompted to confirm your action, press F10.

To disable the embedded numeric keypad at start up, repeat the above procedure with the Num Lock State at Boot field toggled Off.

NOTE: The embedded numeric keypad can be enabled or disabled with

Fn+Num Lk in either startup state.