Compaq M300 manual Grounding Methods, 2Electrostatic Discharge

C-2Electrostatic Discharge

Grounding Methods

If installation instructions direct you to unplug the computer or an optional docking base, unplug it after being properly grounded and before removing the cover. Use one or more of the following grounding methods.

■Touch the unpainted metal surface or lug nuts on the connectors on the back of the computer or docking base. Avoid touching connector pins.

■Touch an exterior unpainted metal surface of equipment that is connected to an electrical outlet by a grounding plug.

■Use a wrist strap connected by a ground cord to the computer chassis.

Wrist straps are flexible grounding straps with a minimum of 1 megohm

± 10 percent resistance in the ground cords. To provide proper ground, wear the strap snug against the skin.

NOTE: If you need more information about static electricity or assistance with product installation, contact your Compaq authorized dealer, reseller, or service provider.