Falcon® Desktop Utility for Windows® CE

Setting a Password

To set a password:

1.Enter a password in the field. This allows the user to specify a pass- word when this utility is launched. By default there is no password set.

Be sure to record the Password for future reference.

2.Re-enter the password in the second field.

3.Select/tap Set Password to enable the password.

4.Select/tap OK close the Set Password Confirmation dialog.

You must select/tap Set Password prior to exiting FDU in order to store and activate your new password. It is not necessary to select Enable Falcon Desktop.

If you select/tap Restore Defaults it will remove all custom settings and restore all the factory default settings, except a previously set password.

CAUTION

Changing a Password

To change to a new password:

1.Enter a new value in the Enter Password field.

2.Re-enter the new value in the Re-enter Password field.

3.Select/tap Set Password.

Removing a Password

To remove a password:

1.Enter blanks in both Password fields.

2.Select/tap Set Password.

Password Request Dialog Box

Once the password is set, the next time you open the Falcon Desktop Utility, the FDU Password dialog box opens.

B-4

Falcon® 4400 Series with Windows® CE