Configuring the Falcon

between Concurrent (the aiming beam and the illumination beam turn on at once); and Interlaced (the aimer beam and illumination alternate being on). Set Brightness and Timeout properties using the sliders.

Figure 2-9. Decoding Properties: Devices

To view other configuration options, select Configure > General from the menu

•Devices: Enable the keyboard wedge for bar code scanner, Magnetic Stripe Reader, RFID, and enable Read-Ahead for attached devices.

Bar Code Symbology Pages

Use the pull-down menus from Configure > 1D Bar Code or 2D Bar Code, or tap the left and right arrow keys to navigate the different pages of the bar code symbology pages. Each bar code symbology opens to its own page, as shown in Figure 2-11 on page 2-13.

2-12

Falcon® 4400 Series with Windows® CE