Datalogic Scanning 4410, 4420 Maxicode, ite, Label, Compos, Enable, Length, User ID, Minimum, User ID, Maxicode, Maxicode, Maxicode, Code Parameter/ Description

Bar Code Parameters

					Defaults		Scanner Type
		I.	Accept
Code Parameter/ Description							Laser/	2D
		D.	able			Fac-
		#	Input	Min	Max		Linear	Imag
						tory
							Imager	er
	Specifies the symbology identifier		Any sin-
Compos-	(if any) that is sent when parame-	0	gle
	ter Send Code ID (Index 0025) is	A	ASCII
ite				‘b’	‘b’	‘b’
	set to 3. ASCII code zero (null) is	2	charac-
User ID
	used to indicate that an identifier is	B	ter (00 =
	not to be sent for the symbology.		Off)
NOTE: For the 2D Imager, RSS-Expanded User Code ID is used for Composite
Maxicode				Enter 1 for On
				and 0 for Off.
		0
Maxicode	Enables/disables the Maxicode	B	On or	Off	On	On		9
Enable	symbology.	0	Off
		8
Minimum	Set the minimum bar code label	0
		B						9
Label	length to be less than or equal to		1 - 138	1	138	1
		2
Length	maximum label length.
		4
	This feature specifies the maxi-
	mum allowable length of a label.	0
	The length includes check and
Maxicode		B						9
	data characters, if applicable.		1 - 138	1	138	138
Maximum		2
	Maximum Label Length should be
		5
	greater than or equal to Minimum
	Label Length.
	Specifies the symbology identifier		Any sin-
	(if any) that is sent when parame-	0	gle
Maxicode	ter Send Code ID (Index 0025) is	B	ASCII	‘W’	‘W’	‘W’		9
User ID	set to 3. ASCII code zero (null) is	2	charac-
	used to indicate that an identifier is	7	ter (00 =
	not to be sent for the symbology.		Off)

Product Reference Guide F-27