Configuring the Falcon

"Regional Settings" on page 2-31

"Remove Programs" on page 2-32

"Storage Properties" on page 2-32

"Stylus Calibration" on page 2-33

"System Properties" on page 2-35

"Volume and Sounds" on page 2-38

"Wi-FI" on page 2-39

Backlight

Increasing backlight brightness can cause the battery pack to discharge at a faster rate. The battery discharge rate decreases with a decrease in backlight usage.

To change the Backlight settings, complete the following steps:

1.Select Start > Settings > Control Panel > Backlight to open the Backlight control panel. Some Falcon keypads also provide keyboard shortcuts to launch the Backlight control panel:

On the 26-key model press: <Fn>+<Backlight> ().

On the 48-key model press: <Fn>+<Backlight> ().

On the 52-key model press: <Fn>+< . >.

2.On the Brightness tab (refer to Figure 2-1), select one of the five (5) radio buttons to adjust the brightness to the desired setting by tapping it with the stylus. You can also use the <UP> and <DOWN> arrow keys to adjust this setting.

3.Auto Power-Save dims (rather than turning off) the backlight after 15 seconds of inactivity. This features does not change the behavior of the Auto-Off Settings. (Refer to "Power Configuration" on

page 2-30).

2-2

Falcon® 4400 Series with Windows® CE