Falcon Desktop Utility

This dialog box will only open if a password was defined.

Figure B-3. Setting a PasswordTable B-3. Setting a Password Dialog

Command

Description

 

 

Enter Password

Enter your password using the keypad, or using the stylus on the soft

 

input panel (SIP) in the text box.

 

 

OK

Select/tap OK to accept the password.

 

 

X

Select/tap X to cancel the request to start the FDU.

 

 

Complete the FDU Config dialog:

1.Type in your password using either the keypad on the unit, or using the stylus on the soft input panel (SIP).

If you enter an incorrect password, the system will prompt you to input the correct one.

2.Select/tap OK to verify the password. Or tap X to cancel.

Setting Hot Keys

You can use Hot Keys (HKeys) Tab to associate specific keys, such as <F1>- <F10>, with specific applications. You can also create a new Hot Key combinations ("Adding a New Hot Key" on page B-7). Select the HKeys tab to access these options.

For example, you could set <F2> to launch a sample application like: \Windows\pword.exe.

Product Reference Guide

B-5