Datalogic Scanning 4410, 4420 manual 133

Bar Code Parameters

					Defaults		Scanner Type
		I.	Accep-
Code Parameter/ Description							Laser/	2D
		D.	table			Fac-
		#	Input	Min	Max		Linear	Imag
						tory
							Imager	er
Code 93				Enter 1 for On
				and 0 for Off.
		0
Enable	Enables/disables the Code 93 sym-	4	On or	Off	On	Off	9	9
	bology.	0	Off
		0
Enable	Enables more aggressive decoding	0
Aggres-		4	On or				9
	algorithms to be used in order to			Off	On	Off
sive		0	Off
	scan hard to read labels.
Decoding		1
Minimum	Set the minimum label length to be	0
		4					9	9
Label	less than or equal to maximum		01 - 50	01	01	02
		2
Length	label length.
		0
	This feature specifies the maximum
Maximum	allowable length of a Code 93 label.	0
	The length includes check and data	4	01 - 50	01	50	20	9	9
Label
	characters. Maximum Label Length	2
Length
	should be greater than or equal to	1
	Minimum Label Length.
	Sets the number of times a label	0
Read Veri-		4					9
	must be read before it is transmit-		01 - 04	01	02	01
fication		2
	ted.
		2
	Specifies the symbology identifier		Any
			single
	(if any) that is sent when parameter	0
			ASCII
	Send Code ID (Index 0025) is set to	4					9	9
User ID			charac-	'L'	'L'	'L'
	3. ASCII code zero (null) is used	2
			ter
	to indicate that an identifier is not to	3
			(00 =
	be sent for the symbology.
			Off)

Product Reference Guide F-7