Datalogic Scanning 4410, 4420 <Enter, CAUTION, Double-Tap, Calibration, Calibration, Storage Properties, 2.From the Store Info pull-downlist, select the desired storage device

Stylus Calibration

1.Select Start > Settings > Control Panel > Storage Properties.

2.From the Store Info pull-down list, select the desired storage device.

3.You can also format, dismount, and create partitions on storage devices using this control panel.

4.To save and exit the Storage Properties control panel, tap OK on the control bar, or press <Enter> on the keypad.

Dismounting or formatting the FlashFX drive will erase all files and program stored in the drive.

CAUTION

Stylus Calibration

You might need to recalibrate the touch screen (i.e. when you attempt to select one item with the stylus, another item is erroneously selected).

To recalibrate the touch screen, complete the following steps:

1.Select Start menu > Settings > Control Panel > Stylus to open the Stylus Properties dialog as shown in Figure 2-22 on page 2-34.

2.Adjust Double-Tapsensitivity if needed or desired.

3.Select the Calibration tab to open the Calibration application.

Product Reference Guide 2-33