Decoding

Decoding

You can configure the Falcon’s decoding options by tapping on Start > Settings

>Control Panel > Decoding. Decoder configuration can also be accomplished for large numbers of terminals using FMU (Falcon Management Utility).

There are two sections in the Decoding control panel, each containing additional pages. There are six General Configuration pages and multiple Bar Code symbology pages.

Other decoding parameters are described in Programming Parameters, starting on page F-1;bar code settings are provided in Programming Bar Codes, starting on page G-1.

Configuration Control Panels

Select the desired configuration from the following options shown in Figure 2- 4, and the other Decoding Properties figures on the following pages.

Use the pull-down menus or tap the left and right arrow keys to navigate the different pages of the Configure utility.

Figure 2-4. Decoding Properties: Audio

To view other configuration options, select Configure > General from the menu

•Audio: Sets volume, tone, duration, and number of various types of beeps.

Product Reference Guide

2-9