Chapter 4

Networks, Communications,

and Connections

Overview

This section contains the following topics:

•"Installing & Setting Up Microsoft ActiveSync" starting on page 4-1.

•"Installing Microsoft ActiveSync" on page 4-2.

•"Setting Up ActiveSync" on page 4-4.

•"Installing the USB Driver" on page 4-5.

•"Using ActiveSync" starting on page 4-6.

•"Networking" starting on page 4-8.

•"Setting Up the Network ID" starting on page 4-8.

•"Network and Dialup Connections" starting on page 4-9.

•"SNMP" starting on page 4-9.

Installing & Setting Up Microsoft ActiveSync

This section provides instructions on setting up the Host PC so that the PC can communicate with the Falcon and the dock.

The screen shots in the manual were taken and the procedures were written using

Windows® XP. If you are using Windows® 2000 or Windows® NT, appearances and procedures may be slightly different.

Important! You must disconnect any other PDAs, PDTs, or Falcons using USB ActiveSync from the Host PC prior to connecting the Falcon or the Host PC and Microsoft ActiveSync may not recognize the new device.

Product Reference Guide

4-1