Power Supplies

Removing Strap Studs/Bumpers

Figure A-6. Strap Studs

Strap Stud

Bumpers

Strap Studs

1.Loosen and pull off the strap stud bumpers (if present). If necessary, pry off using a screwdriver.

2.Use a 5/64” Allen wrench (included with the printer adapter) to loosen and remove each Strap Stud.

Once you have removed the strap studs, attach the adapter to the Falcon by tightening the thumbscrews on the adapter.

Figure A-7. Attaching the Serial Printer Adapter

Product Reference Guide

A-5