Configuring the Falcon

Certificates

Certificates are used by some applications for establishing trust and to secure communications. See the Microsoft Windows CE help on your Falcon unit for further information about Certificates.

Date and Time

In this control panel, you can change the year, month, date, time, time zone, or select automatic adjust for Daylight Savings Time. To set or change the date and time:

1.Select Start > Settings > Control Panel > Date/Time.

2.Select the month to open a pull- down list of months or tap the arrow buttons on either side of the month to increase or decrease the month.

3.To change the year, select the year to open a numeric dial. Select the up arrow to increase the value; select the down arrow to decrease the value. Or you can type a new year value in the field.

4.To change the time, select the

hour, minute, seconds, or AM/PM and select the up arrow to increase the value; select/tap the down arrow to decrease the value. Or you can type a new time value in the field.

5.Select your correct time zone from the pull-down list.

6.To automatically adjust the clock for Daylight Savings Time, enable the checkbox at the bottom of the screen.

7.Select Apply to save your changes and make additional modifications.

Select OK to save your changes and exit Date/Time Properties.

Select/tap the close button to exit without saving your changes.

2-8

Falcon® 4400 Series with Windows® CE