Datalogic Scanning 4410, 4420 Input, Defaults, Acceptable, Code Parameter/ Description

Bar Code Parameters

			I.	Acceptable		Defaults
	Code Parameter/ Description		D.
				Input	Min	Max	Factory
			#
			0
Spotting Beam		Enables/disables the Spotting Beam	0	On or Off	On	On	On
Enable			0
			1
			0	00 = 0.25 sec.
				01 = 0.5 sec.
Spotting Beam		Sets the duration of the spotting beam	0
				02 = 1.0 sec.	01	01	01
Timeout		before it automatically turns off.	2
				03 = 1.5 sec.
			3
				04 = 2.0 sec.
			0
Release Scan		Sets the duration of the scan before it	0	1-10	02	02	02
Timeout		turns off.	2
			4
Number of			0
		Determines the number of beeps for a	0	01 - 04	01	01	01
Good-Read
		good read indicator.	2
Beeps
			0
			0	00 - 07
Good-Read			0
		Adjusts the pitch of the beeper frequency.		(00 = Lowest;	00	00	00
Beep Tone			2
				07 = Highest)
			1
			0	00 = 0.07 sec.
Good-Read		Determines the duration of a good read	0	01 = 0.13 sec.	00	00	00
Beep Duration		beep.	2	02 = 0.18 sec.
			2	03 = 0.36 sec.
		Specifies the symbology identifier (if any)		00 = Off
		that is sent by the decoder when parame-	0
				01 = DLM
Send Symbol-		ter Send Code ID (Index 0025) is set to 3.	0
				IDs*	00	01	00
ogy Identifiers		ASCII code zero (null) used to indicate	2
				02 = AIM IDs
		an identifier not to be sent for the symbol-	5
				03 = User IDs
		ogy.

Product Reference Guide F-35