Datalogic Scanning 4410, 4420 ActiveSync, File > Get Connected, Setting Up ActiveSync, Figure 4-4.Microsoft ActiveSync dialog

Networks, Communications, and Connections

Setting Up ActiveSync

1.Open ActiveSync from the System Tray of the Host PC.

2.Connect the Falcon to the Host PC via a dock or USB/Serial cable.

3.Verify that the Falcon is turned on.

4.Within a minute, the ActiveSync window should appear, attempting to connect to a new device.

Figure 4-4. Microsoft ActiveSync dialog

5.If ActiveSync does not connect within two minutes, try the following:

•Double-click and open ActiveSync from the Host PC’s System Tray if it is not already open.

•Remove the Falcon from the dock and then reinsert it into the dock or disconnect the cable from the Host PC and reconnect it.

•Select File > Get Connected for ActiveSync to look for a mobile device.

•Go to File > Connection Settings and make sure that your Connec- tion Settings dialog show the same selections as that in Figure 4-5below if you have a USB connection. If you have a serial connec- tion, select the correct COM port from the pull-down list.

4-4 Falcon® 4400 Series with Windows® CE