Accessories

2.Insert the top tab of the handle into the slot at the top of the handle recess (refer to Figure A-11).

3.Replace the screws located just above the battery cover’s latch dials.

4.The process is complete upon successful test of the trigger function.

Tethered Stylus

An optional Tethered Stylus is available for use on any of the Falcon 4400 series models. The Tether attaches the stylus to the Falcon unit, preventing the stylus from accidentally becoming lost or misplaced.

Tether

Installing a Tethered Stylus

CAUTION

If your Falcon did not come with a Tethered Stylus, it can be easily installed.

To install a Tethered Stylus on the Falcon 44xx complete the following steps:

1.Turn the Falcon face-down. Ensure that power is OFF.

2.Using a Phillips screwdriver, remove the 6 mm screw at the bottom of the Stylus holder.

3.Use the longer 16 mm screw included with the Tethered Stylus kit to attach the Tethered Stylus to the Falcon.

Do not use the 16mm long screw that came with the Tethered Stylus without the Tether. Damage to internal components could occur if the screw is used without the Tether, since the screw is longer than the standard 6 mm screw used without the Tether.

4. Slide the other end of the Tether through the Stylus.

A-10

Falcon® 4400 Series with Windows® CE