Configuring the Falcon

4.A File Save message showing the image file name will appear, unless that option has been pre- viously deselected in the File set- tings (in that case, the file will automatically save without prompting). See "Image File" on page 2-18, to change settings.

5.Tap Yes to save the image, or No to discard it.

Image File

1.Specify where you want images to be saved in the File Folder field. If you do not select a folder, images will be saved to the default folder “\Images.” Use … (browse) to browse to a different folder.

2.Use File Format to select the image format you want. You can choose between the following graphics formats:

•TIFF (1-bit monochrome)

•TIFF (8-bit grayscale)

•JPEG (8-bit grayscale)

•BMP (1-bit monochrome)

•BMP (8-bit grayscale)

3.Check Confirm before Saving File to automatically get a File Save mes- sage when saving images (see Figure 2-12B).If unchecked, the file will automatically save to the specified file folder (at the root of the Fal- con’s drive) without prompting.

4.Check Exit after Image Capture to cause the Imaging Control Panel to close automatically after saving the image to a file.

2-18

Falcon® 4400 Series with Windows® CE