Configuring the Web Server

4.If the service is listed and not running, type the following to start the HTTP Web Server:

\> services start HTP0:

5.To restart the Web Server, type:

\> services refresh HTP0:

This will cause the Web Server to reload any information pertaining to the Web Server in the registry. For additional information on the registry entries, see "Web Server Registry Settings" on page C-4.

To configure the Web Server to allow access to the Web and Net administration pages:

1.On the Falcon 44xx create the following registry entries:

[HKEY_LOCAL_MACHINE\COMM\HTTPD\VROOTS\/NetAdmin] “Default” = “\windows\natadmin.dll” [HKEY_LOCAL_MACHINE\COMM\HTTPD\VROOTS\/WebAdmin] “Default” = “\windows\httpdadm.dll”

2.In a Command Prompt window on the Terminal, type the following:

\> services refresh HTP0:

Setting Up a User

The following example demonstrates how to set up a user named Testuser in a group called Testgroup.

To configure User and Group Permissions for the Web Server:

1.On the Falcon 44xx, launch Internet Explorer and type the following address in the address bar: http://localhost/NetAdmin. The Web-based network configuration utility appears.

2.Fill in the Enter new password and Confirm new password boxes, then click Submit on the bottom of the page.

3.On the menu bar of the displayed web page, click the User Accounts link. The Enter Network Password dialog box appears.

4.Type Admin in the User Name specified above in the Password

box, and type the password that you box. Leave the Domain box empty.

5. Click OK. The User Manager Setup page appears.

C-2

Falcon® 4400 Series with Windows® CE