Software Applications

5.Verify that the Falcon is turned on. Insert the device into a powered dock connected to the host computer.

6.Click Update Terminal on FUU on the host PC.

7.FUU will compare the selected firmware image with the firmware already loaded on the Falcon; if the images are different, FUU will pro- ceed to update the firmware image on your Falcon.

Please be patient and do not remove the Falcon from the Dock during this proce- dure. The firmware image of the Falcon can take as long as:

12 minutes to download using a USB connection.

22 minutes to download using a serial connection with 115K baud rate.

130 minutes to download using a serial connection with 19.2K baud rate.

8.After the firmware of your Falcon has been updated, you must per- form a warm reset of the Falcon. Refer to the Falcon 4400 Series Quick Reference Guide (QRG) for reset instructions.

Restoring Falcon Firmware

If the firmware image on the Falcon becomes corrupted, the Falcon will beep twice and show a blank screen when powered on. This can happen if a firmware update is aborted, such as during a power loss or if the Falcon is removed from the Dock before completion of the procedure.

To reinstall the firmware, complete the following steps:

3-10

Falcon® 4400 Series with Windows® CE