Datalogic Scanning 4410, 4420 Min, Max, mat, ness, Accep, Scale, Factory, Imaging, Imaging, Imaging, Imaging, Defaults, Rotation, Brightness, Code Parameter/ Description

Bar Code Parameters

			I.	Accep-		Defaults
	Code Parameter/ Description		D.	table
					Min	Max	Factory
			#	Input
				0 to 3 (0
			0	to 270
				degrees
Imaging		Specifies how much the imager will rotate	C
				in 90	0	0	0
Rotation		images it takes.	2
				degree
			5
				incre-
				ments)
				0 =
				100%
				1 = 50%
		Specifies how much the imager is to scale	0	(1/4
		images it takes. It is the percentage of the		size)
Imaging			C
		original image that is used to create the		2 = 33%	0	0	0
Scale			2
		final image. Scales the x,y dimensions of		(1/9
			6
		the image.		size)
				3 = 25%
				(1/16
				size)
		Specifies the storage format an imager will
		use when taking images.	0
		0 (TIFF monochrome)
Imaging For-			C
		1 (TIFF 8 bit grayscale)		0 to 4	2	2	2
mat			2
		2 (JPEG 8 bit grayscale)
			7
		3 (BMP monochrome)
		4 (BMP 8 bit grayscale)
			0	0 to 99
Imaging		Specifies the brightness level an imager will	C
				(low to	50	50	50
Brightness		use when taking images	2
				high)
			8
Imaging		Specifies how much (if at all) an imager will	0	0 (off), 1
			C	to 99
Edge Sharp-		attempt to sharpen edges in images it			0	0	0
			2	(dull to
ness		takes.
			9	sharp)

Product Reference Guide F-33