Dell 1815DN service manual Pull up the CCD Shaft and take out the Ccdm

Precautions

12. Pull up the CCD Shaft and take out the CCDM.

CCDM

CCD Shaft

13.Squeeze the spring to release the tension in the Belt and lift from the pulleys, as shown below.

Belt Spring

14.Remove the three screws securing the Scan Motor Ass'y and remove it.

Scan Motor Ass'y

15.If necessary, remove the two screws securing the Scan Motor and remove it, as shown below.

Gear Bracket Ass'y

Scan Motor

Caution : Reassembling CCDM

1)When refitting the Scanner Belt and Belt Spring take care to relocate the tension spring as close to the right side of the CCDM as is possible, as shown below.

2)When refitting the Scan Upper Cover take care to ensure that the Cover Open Switch is not trapped.

Service Manual 5-13