Precautions

5.23 Feed Roller Parts

1.Before you remove the Feed Roller Parts, you should remove:

-Pick Up Roller Ass'y (Refer to 5.17)

-Duplex Guide Housing (Refer to 5.18)

-Middle Cover Ass'y (Refer to 5.20)

-MPF Housing (Refer to 5.22)

2.Remove the two screws securing the both side of the Guide Paper and then remove the Guides.

Guide Paper

3.Pull up the Feed Idle Shaft and the Bushs (with Spring).

Feed Idle Shaft

Srring

Bush

4.Release the E-Ring securing the Feed2 Gear and remove it.

E-Ring

Feed2 Gear

5.Remove the three screws securing the Feed Bracket Unit and then remove the Feed Bracket Unit and Feed2 Shaft.

Feed Bracket Unit

Feed2 Shaft

Service Manual 5-31

Page 66
Image 66
Dell 1815DN service manual Feed Roller Parts, Pull up the Feed Idle Shaft and the Bushs with Spring