Service Manual
Precautions
5-20
1. Before you remove the Drive Ass'y, you should
remove:
- Rear Cover (Refer to 5.4)
- Side Cover Left (Refer to 5.6.4)
- Shield Controller Ass'y (Refer to 5.10)
2. Remove the five screws securing the Drive Ass'y and
remove it.
Notice : The six screws have numbers stamped into the
Drive Ass'y base plate. When refitting the Drive
Ass'y tighten the screws the order they are
numbered. Only screws numbered 1 to 5 are
fitted at this stage. Screw 6 is fitted when the
Shield Controller Ass'y is refitted.
3.
If necessary, remove the four screws securing the
BVDC Motor Ass'y and remove it.
5.11 Drive Ass'y
Drive Ass'y
Gear Bracket Ass’y
BVDC Motor Ass’y
Harness