Precautions

6.If necessary, release the three E-Rings securing the Gears (T2 Idle, Retard, Idle) and then remove the Gears from the Feed Bracket, as shown below.

Idle Gear

Bracket E-Ring

Retard Gear

T2 Idle Gear

Notice : Be aware of the E-Rings to ensure they are not lost.

7. Remove the Clutch Unit, as shown below.

Clutch Unit

Feed1 Gear Ass'y

Feed Shaft

8.Pull up the Feed1 Roller from the Bushing, as shown below.

Feed1 Roller

5-32Service Manual

Page 67
Image 67
Dell 1815DN Remove the Clutch Unit, as shown below, Pull up the Feed1 Roller from the Bushing, as shown below