Dell MD3620I, MD3600I owner manual Changing the Virtual Disk Modification Priority, 112

5In Advanced virtual disk parameters, you can select:

•Use recommended settings.

•Customize settings.

6If you select Use recommended settings in Advanced virtual disk parameters, click Finish. Otherwise, click Next.

7In the Customize Advanced Virtual Disk Parameters window, select the appropriate Virtual Disk I/O characteristics type. You can select:

•File system (typical)

•Database

•Multimedia

•Custom

NOTE: If you select Custom, you must select an appropriate segment size.

8Select the appropriate Preferred RAID controller module ownership.

9Click Finish.

The virtual disks are created.

Changing the Virtual Disk Modification Priority

You can specify the modification priority setting for a single virtual disk or multiple virtual disks on a storage array.

Guidelines to change the modification priority of a virtual disk:

•If more than one virtual disk is selected, the modification priority defaults to the lowest priority. The current priority is shown only if a single virtual disk is selected.

•Changing the modification priority by using this option modifies the priority for the selected virtual disks.

To change the virtual disk modification priority:

1In the AMW, select the Logical tab.

2Select a virtual disk.

3In the toolbar, select Virtual Disk→ Change→ Modification Priority. The Change Modification Priority window is displayed.

112

Configuration: Disk Groups and Virtual Disks