Troubleshooting: Your Array 265
Troubleshooting Array Cooling Problems CAUTION: Many repairs may only be done by a certified service technician.
Youshould only perform troubleshooting and simple repairs as authorized in
yourproduct documentation, or as directed by the online or telephone service
andsupport team. Damage due to servicing that is not authorized by Dell is not
covered by your warranty. Read and follow the safety instructions that came
withthe product.
Ensure that none of the following conditions exist:
• Array cover or drive blank is removed.
• Ambient temperature is too high. See “Technical Specifications” in the
Getting Started Guide
.
• External airflow is obstructed.
• The power supply/cooling fan module is removed or has failed. See
"Troubleshooting Power Supply/Cooling Fan Module" on page264.
If the problem is not resolved, see
"Getting Help" on page273
.
Troubleshooting Expansion Enclosure Management Modules CAUTION: Many repairs may only be done by a certified service technician.
Youshould only perform troubleshooting and simple repairs as authorized in
yourproduct documentation, or as directed by the online or telephone service
andsupport team. Damage due to servicing that is not authorized by Dell is not
covered by your warranty. Read and follow the safety instructions that came
withthe product.
CAUTION: It is recommended that you turn off the host server before turning off
the expansion enclosure to prevent loss of data.
• If the EMM status LED is solid or blinking amber (2 or 4 times per
sequence):
a
Turn off the server.
b
Remove the EMM and verify that the pins on the backplane and
EMM are not bent. See Removing an EMM in the MD1200 and
MD1220 Storage Enclosures
Hardware Owner's Manual
.
book.book Page 265 Thursday, December 9, 2010 3:20 PM