Installing the Backplane

1Align the holes on the backplane with the holes on the array.

2Tighten the captive screw to secure the backplane to the chassis. See Figure 16-16 for PowerVault MD3600i or Figure 16-17 for PowerVault MD3620i.

3Replace the screws that secure the backplane to the chassis. See Figure 16-16 for PowerVault MD3600i or Figure 16-17 for PowerVault MD3620i.

4Align the slots on the RAID controller module /power supply cage with the tabs on the chassis. See Figure 16-15.

5Push the RAID controller module /power supply cage toward the front of the array.

6Replace the screws that secure the RAID controller module /power supply cage to the chassis.

7Replace the control panel. See "Installing the Control Panel" on page 228.

8Replace the power supply/cooling fan modules. See "Installing a Power Supply/Cooling Fan Module" on page 226.

9Replace the hard drives. See "Installing a Hard Drive" on page 214.

10Connect all the cables to the array.

11Turn on the array and the host server.

232

Management: Installing Array Components

Page 232
Image 232
Dell MD3620I, MD3600I owner manual Installing the Backplane, 232