Downloading Only NVSRAM Firmware

Use the command line interface (CLI) to download and activate NVSRAM to several storage arrays. For more information, see the PowerVault Modular Disk Storage Manager online help topics.

To download only NVSRAM firmware:

1To download the NVSRAM firmware from:

EMW—Go to step 7.

AMW—Go to step 2.

2Select AdvancedMaintenanceDownloadRAID Controller

Module NVSRAM or

Select the Support tab, and click Download Firmware. In Select download task, select Download RAID controller module NVSRAM and click OK.

An error message appears. Click OK to close it, and select a compatible file.

3To locate the directory in which the file to download resides, click Select File.

4Select the file to download in the File selection area, and click OK.

By default, only downloadable files that are compatible with the current storage array configuration appear.

When you select a file in the File selection area, applicable attributes (if any) of the file appear in the NVSRAM File information area. The attributes indicate the version of the NVSRAM file.

5Click Transfer.

NOTE: If the file selected is not valid or is not compatible with the current storage array configuration, the File Selection Error dialog appears. Click OK to close it, and choose a compatible NVSRAM file.

6Click Yes in the Confirm Download dialog. The download starts.

Management: Firmware Downloads

201

Page 201
Image 201
Dell MD3600I, MD3620I owner manual Downloading Only Nvsram Firmware, 201