2Align the screw holes on the display panel with the screw holes on the
3Replace the display assembly. "Replacing the Display Assembly" on page 111.
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in damage to the computer.
4Connect your computer and all attached devices to electrical outlets, and turn them on.
Display-Panel Brackets
Removing the Display-Panel Brackets
1Follow the instructions in "Before You Begin" on page 11.
2Remove the display assembly. See "Removing the Display Assembly" on page 109.
3Remove the display panel. See "Removing the Display Panel" on page 113.
4Turn the display panel over.
5Press the locking tabs on the LVDS cable to release the LVDS cable from the connector on the display panel.
6Remove the four screws (two on each side) that secure the
114
Display