Dell W03C owner manual Removing the Rear-Stand Assembly

6

Rear-Stand Assembly

WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance.

CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell is not covered by your warranty.

CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer).

Removing the Rear-Stand Assembly

1Follow the instructions in "Before You Begin" on page 11.

2Remove the back cover. See "Removing the Back Cover" on page 19.

3Remove the two screws that secure the rear-stand assembly to the chassis.

4Slide the rear-stand assembly towards the bottom of the computer and lift it away from the chassis.

Rear Stand Cover

35