Dell W03C owner manual Replacing the Antenna-In Connector

1

2

1 screws (2) 2 antenna-in connector cable

Replacing the Antenna-In Connector

1Follow the instructions in "Before You Begin" on page 11.

2Slide the antenna-in connector into the slot on the chassis.

3Replace the two screws that secure the antenna-in connector to the chassis.

4Connect the antenna-in cable to the connector on the Mini-Card.

5Replace the system-board shield. See "Replacing the System-Board Shield" on page 54.

6Replace the rear I/O cover. See "Replacing the Rear I/O Cover" on page 40.

7Replace the side I/O cover. See "Replacing the Side I/O Cover" on page 41.

8Replace the rear-stand assembly. See "Replacing the Rear-Stand Assembly" on page 36.

9Replace the back cover. See "Replacing the Back Cover" on page 21.

CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in damage to the computer.

90

Antenna-In Connector