Dell W03C owner manual 133

4Remove the rear I/O cover. See "Removing the Rear I/O Cover" on page 39.

5Remove the side I/O cover. See "Removing the Side I/O Cover" on page 41.

6Remove the system-board shield. See "Removing the System-Board Shield" on page 53.

7Locate the 3-pin password reset jumper (PASSWORD_CLEAR) on the system board. See "System Board Components" on page 17.

8Remove the 2-pin jumper plug from pins 2 and 3 and fix it on pins 1 and 2.

9Wait for approximately five seconds to clear the password setting.

10Remove the 2-pin jumper plug from pins 1 and 2 and replace it on pins 2 and 3.

System Setup Utility

133