2
1 |
1 | rear I/O cover | 2 | screws (4) |
Replacing the Rear I/O Cover
1Follow the instructions in "Before You Begin" on page 11.
2Align the screw holes on the rear I/O cover with the screw holes on the chassis.
3Replace the four screws that secure the rear I/O cover to the chassis.
4Replace the
5Replace the back cover. See "Replacing the Back Cover" on page 21.
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in damage to the computer.
6Connect your computer and all attached devices to electrical outlets, and turn them on.
40
I/O Board Cover
