Dell W03C owner manual Replacing the Rear-Stand Assembly

2 1

1 rear-stand assembly 2 screws (2)

Replacing the Rear-Stand Assembly

1Follow the instructions in "Before You Begin" on page 11.

2Place the rear-stand assembly on the chassis and slide it to the top of the computer.

3Replace the two screws that secure the rear-stand assembly to the chassis.

4Replace the back cover. See "Replacing the Back Cover" on page 21.

CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in damage to the computer.

5Connect your computer and all attached devices to electrical outlets, and turn them on.

36

Rear Stand Cover