Dell W03C owner manual 112

4Align the display assembly over the chassis and gently snap the chassis into place.

5Replace the five screws that secure the chassis to the display assembly.

6Replace the 13 screws that secure the chassis to the display bezel.

7Route the camera cables, touch-screen control board cables, backlight cable and LVDS cable through the routing guides.

8Connect the cables to the connectors on the system board, touch-screencontrol board, AV board, and the converter board.

9Replace the middle frame. See "Replacing the Middle Frame" on page 72.

10Replace the processor heat-sink fan. See "Replacing the Processor Heat-Sink Fan" on page 76.

11Replace the AV board. See "Replacing the Audio Video (AV) Board" on page 45.

12Replace the system-board shield. See "Replacing the System-Board Shield" on page 54.

13Replace the rear I/O cover. See "Replacing the Rear I/O Cover" on page 40.

14Replace the side I/O cover. See "Replacing the Side I/O Cover" on page 41.

15Follow the instructions from step 4 to step 6 in "Replacing the Optical Drive" on page 29.

16Replace the VESA mount. See "Replacing the VESA Mount" on page 38.

17Replace the rear-stand assembly. See "Replacing the Rear-Stand Assembly" on page 36.

18Replace the back cover. See "Replacing the Back Cover" on page 21.

CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in damage to the computer.

19Connect your computer and all attached devices to electrical outlets, and turn them on.

112

Display