Dell W03C owner manual Processor Heat Sink

2Clean the thermal grease from the bottom of the processor heat-sink and reapply it.

3Replace the screw that secures the processor heat-sink to the chassis.

4Align the four captive screws on the processor heat-sink with the screw holes on the system board and tighten the screws.

5Replace the system-board shield. See "Replacing the System-Board Shield" on page 54.

6Replace the rear I/O cover. See "Replacing the Rear I/O Cover" on page 40.

7Replace the side I/O cover. See "Replacing the Side I/O Cover" on page 41.

8Replace the rear-stand assembly. See "Replacing the Rear-Stand Assembly" on page 36.

9Replace the back cover. See "Replacing the Back Cover" on page 21.

CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in damage to the computer.

10Connect your computer and all attached devices to electrical outlets, and turn them on.

Processor Heat Sink

81