3
2
1
1 | speakers (2) | 2 | screws (4) |
3 | speakers cable |
|
|
Replacing the Speakers
1Follow the instructions in "Before You Begin" on page 11.
2Align the screw holes on the speakers with the screw holes on the chassis.
3Replace the four screws (two on each speaker) that secure the speakers to the chassis.
4Route the speakers cable and connect the speakers cable to the connector on the system board.
5Replace the
6Replace the rear I/O cover. See "Replacing the Rear I/O Cover" on page 40.
7Replace the side I/O cover. See "Replacing the Side I/O Cover" on page 41.
8Replace the
9Replace the back cover. See "Replacing the Back Cover" on page 21.
102
Speakers