10
Converter Board
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance.
CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell is not covered by your warranty.
CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer).
Removing the Converter Board
1Follow the instructions in "Before You Begin" on page 11.
2Remove the back cover. See "Removing the Back Cover" on page 19.
3Remove the
4Remove the VESA mount. See "Removing the VESA Mount" on page 37.
5Remove the rear I/O cover. See "Removing the Rear I/O Cover" on page 39.
6Disconnect the
7Remove the two screws that secure the converter board to the chassis.
8Lift the converter board away from the chassis.
Main Chassis
47