Dell W03C owner manual Alignment post Tab Processor cover Release lever

4

5

	6
			3
	1
	2
1	alignment post	2	tab
3	processor cover	4	release lever
5	processor	6	processor cover notch

8Clean the thermal grease from the bottom of the heat sink.

9Apply the new thermal grease to the top of the processor.

CAUTION: You must position the processor correctly in the processor socket to avoid permanent damage to the processor.

CAUTION: Ensure that you apply new thermal grease. New thermal grease is critical for ensuring adequate thermal bonding, which is a requirement for optimal processor operation.

CAUTION: Ensure that the processor heat-sink is correctly seated and secure.

10Replace the processor heat-sink. See "Replacing the Processor Heat-Sink" on page 80.

11Replace the system-board shield. See "Replacing the System-Board Shield" on page 54.

86

Processor