Dell W03C owner manual 135

7Locate the 3-pin password reset jumper (CMOS_CLEAR) on the system board. See "System Board Components" on page 17.

8Remove the 2-pin jumper plug from pins 2 and 3 and fix it on pins 1 and 2.

9Wait for approximately five seconds to clear the CMOS setting.

10Remove the 2-pin jumper plug from pins 1 and 2 and replace it on pins 2 and 3.

11Replace the system-board shield. "Replacing the System-Board Shield" on page 54.

12Replace the rear I/O cover. See "Replacing the Rear I/O Cover" on page 40.

13Replace the side I/O cover. See "Replacing the Side I/O Cover" on page 41.

System Setup Utility

135