Dell XC730xd owner manual Installing the integrated storage controller card

3. integrated storage-controller card	4. integrated storage controller card
connector on the system board	holder

Next steps

1.Replace the expansion-card riser 1.

2.Replace the cooling shroud.

3.Follow the procedure listed in After working inside your system.

Installing the integrated storage controller card

Prerequisites

1.Ensure that you read the Safety instructions.

2.Follow the procedure listed in Before working inside your system.

3.Remove the cooling shroud.

4.Remove the expansion-card riser 1.

5.Keep the #2 Phillips screwdriver handy.

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.

Steps

1.Align the end of the integrated storage-controller card opposite the connector with the integrated storage-controller card holder.

2.Lower the connector side of the integrated storage-controller card into the integrated storage- controller card connector on the system board.

Ensure that the tabs on the system board align with the screw holes on the integrated storage- controller card.

3.Align the screws on the integrated storage-controller card cable with the screw holes on the connector.

4.Tighten the screws to secure the integrated storage-controller card cable with the integrated storage-controller card connector on the system board.

Next steps

1.Replace the expansion-card riser 1.

2.Replace the cooling shroud.

3.Follow the procedure listed in After working inside your system.

Related video

Figure 31.

http://www.Dell.com/XCSeries/XC730xd/SC

79