Dell XC730xd owner manual Removing the Satadom

Removing the SATADOM

Prerequisites

1.Ensure that you read the Safety instructions.

2.Follow the procedure listed in Before working inside your system.

3.Remove the cooling shroud prior to removing SATADOM. For information about removing the cooling shroud, see Removing the cooling shroud

.

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.

Steps

1.Unplug the power cable from the SATADOM Tape Backup Unit (TBU) power connector.

2.Press the lock release on the SATADOM and pull it up and away from the system.

NOTE: After removing the SATADOM, place it in an anti-static container for reuse, return, or temporary storage.

NOTE: Dell recommends that you do not modify the SATADOM Read/Write default setting.

64