Dell XC730xd owner manual Hard-drive backplane, Installing a hard drive into a hard-drive carrier

Figure 54. Removing and installing a hard drive into a hard-drive carrier

1. screw (4) 2. hard drive

3.hard-drive carrier

Installing a hard drive into a hard-drive carrier

Prerequisites

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.

Steps

1.Insert the hard drive into the hard-drive carrier with the connector end of the hard drive toward the back.

2.Align the screw holes on the hard drive with the set of screw holes on the hard-drive carrier. When aligned correctly, the back of the hard drive is flush with the back of the hard-drive carrier.

3.Attach the screws to secure the hard drive to the hard-drive carrier.

Hard-drive backplane

Depending on your system configuration:

2.5inch (x24) SAS/SATA backplane

3.5inch (x12) SAS/SATA backplane

Removing the hard-drive backplane

Prerequisites

1.Ensure that you read the Safety instructions.

2.Follow the procedure listed in Before working inside your system.

118